6 Steps You Can Take to Create a Safer Loading Dock (Checklist)

Safety must come first, so we’ve put together steps you can take to help create safer loading docks that comply with regulations and accompany your current safety procedures. This loading dock safety checklist is for companies to follow so the inherent risk involved with loading docks is reduced as much as possible, because while cargo is important, your workers are your most important asset. If they’re not safe, then neither is your business.

Loading Dock Safety Checklist

1. Secure the trailer to the dock using the trailer’s wheel

• Wheel-based restraints  engage with trailer wheels to secure vehicles in place. Both automatic and manual options are available

2. Link the gap between the loading dock floor and the trailer bed

• Utilize a dock-leveler

3. Identify damage to trailers during inspections

• Perform exterior and interior inspections checking for faulty landing gear and the structural integrity of rear impact guards. Never assume someone else has performed the inspection.
• Place trailer stands under the nose of spotted trailers to help prevent trailer up-ending and accidents due to landing gear collapse

4. Help ensure the loading dock is free of debris and water using dock seals

5. Properly establish area protection and pedestrian safety with safety barriers

• Fall protection is required for the unprotected loading dock edge with a 1.20 m drop off. Installing loading dock safety barriers will help prevent accidents, injuries and damage to products while still allowing full access to load and unload trailers.

6. Improve visibility and communication with a light communication system that provides visual cues and audible warnings to pedestrians on and off of forklifts.