DOCK LEVELLERS
  • CHKB-S 8000 Hydraulic Hinge Lip Dock Leveller
  • CHKB-S 8210 (HDE-2100) Hydraulic Hinge Lip Dock Leveller
  • CHKB-S 8300 Hydraulic Safe-T-Lip Dock Leveller
  • CHKB-S 8310 (HDE-3100) Hydraulic Safe-T-Lip Dock Leveller
  • CHVB-S 9000 Hydraulic Telescopic Lip Dock Leveller
  • CHVB-S 9100 Hydraulic Telescopic Lip Dock Leveller
  • CHVB-S 9500 Hydraulic Telescopic Lip Dock Leveller
  • CHVB-S Series FLEXIDOCK Telescopic Lip Dock Leveller
  • CHVB-S Series "Step Down" Telescopic Lip Dock Leveller
  • Dok-Commander Control System

  • "Step Down" Hydraulic Dock Leveller with Telescopic Lip
    Model CHVB-S Series

    More and more customers require loading docks that allow vehicles to open their rear doors after they are parked at the loading dock. Typical applications are:

    Cold storage loading docks
    Refrigerated vehicles are not allowed to open their rear doors before they are parked at the loading dock and before the loading operations starts. The cold chain may not be interrupted.

    Loading docks to seal vehicles
    For security reasons many companies seal (with lead) their vehicles when goods are transported between two warehouses. Opening and closing the rear doors of the vehicle after they are parked at the loading dock is an important work-and-time saving alternative.


    With a standard loading dock design, the vehicle rear doors have to be unsealed before approaching the loading dock. After completion of the loading operation, the vehicle has to move forward a few meters before the rear doors can be closed and sealed again. This procedure is affected by weather conditions and therefore more likely to be „forgotten“ from time to time by truck drivers and dock personnel.

    Loading docks with a “Step Down” design allow a comfortable, easy and time saving “sealing” procedure while the vehicle is parked at the loading dock. The "Step Down" design is available on our models CHVB-S 9000, CHVB-S 9100 (with parallel guided platform) and CHVB-S 9500.

    Features and Benefits

    "Step Down" loading dock design
    Allows vehicles to open their rear doors after they are parked at the loading dock for maximum efficiency.

    Stored below dock level
    In the rest position the dock levellers are stored in their lowest position below dock level. This allows vehicles to open their rear doors after they are parked at the loading dock.

    Standard features and benefits
    These dock levellers offer the same features and benefits as our standard range of hydraulic dock levellers with telescopic lip.

    Light communication system (option)
    To protect your building and equipment if dock bumpers cannot be applied due to low dock height.

    Hydraulic dock leveller with telescopic lip model CHVB-S 9500 (1000 mm lip) with "Step Down" loading dock design (inside view)
    Hydraulic dock leveller with telescopic lip model CHVB-S 9500 (1000 mm lip) with "Step Down" loading dock design (inside view)

    Hydraulic dock leveller with telescopic lip model CHVB-S 9500 (1000 mm lip) with "Step Down" loading dock design (outside view)
    Hydraulic dock leveller with telescopic lip model CHVB-S 9500 (1000 mm lip) with "Step Down" loading dock design (outside view)






    EMPLOYMENT
    .
    .

    © Copyright 2009 Rite-Hite Holding Corporation