Hydraulic Dock Leveller with Hinge Lip
Model CHKB-S 8000
This hydraulic dock leveller with hinge lip (400 mm or 500 mm) is available as pit model, dock box model and hang-in frame model to allow easy configuration to suit your existing pit (eg. replacement dock levellers) or newly constructed (prefabricated) concrete pit.
The durable platform is raised by two lifting cylinders with a build in velocity fuse to rapidly stop platform descent in case of an emergency (early departure). The micro-processor controls can be adjusted to meet your specific operating requirements.
The safety features include return to dock position, velocity fuse free-fall protection, full range toeguards with painted yellow/black warning stripes and a maintenance support strut.
Features and Benefits
• Micro-processor controls with return to dock position
Allows easy adjustment to meet your specific operating requirements, standard equipped with return to dock position to enable safe fork-lift truck cross-traffic.
• Durable platform construction
Box construction with welded support beams and anti-slip deck plate (tread plate).
• Designed to compensate for canted truck beds
Up to 100 mm and remains flush with the rear of the pit.
• Hinge lip
Standard length is 400 mm, optional 500 mm. Tapered lip if nominal width is over 2000 mm.
• Reliable hydraulic system
Automatic height adjustment. Two main lifting cylinders with build in velocity fuse (free-fall protection). Power pack is fitted to front of platform for easy maintenance.
• Lip cylinder
The lip is extended with a double acting lip cylinder.
• Maintenance support strut
To support the platform and lip during service and maintenance.
• Integral toeguard
With painted yellow/black warning stripes. |